Recording Using A Usb Flash Drive - Yealink SIP-T46S User Manual

Recording Using a USB Flash Drive

When the phone is idle, and you insert a USB flash drive into the USB port on IP phone, the
phone will detect the USB flash drive and display a flashing icon
flash drive, the icon stops flashing and LCD screen prompts "USB device has been connected
successfully!".
When there is an active call, and you insert a USB flash drive into the USB port on your phone,
the LCD screen will prompt "USB device has been connected successfully! Available Recording
Time: XX:XX:XX". For more information on the available recording time, refer to
Storage Space on page 176.
The following figure shows an example:
Note
Recording using a USB flash drive is not available by default. For more information, contact your
system administrator.
The Start REC soft key controls the recording function, and is available:
The free space of USB flash drive is sufficient

When there are one or more calls connected to your IP phone

During an active call

When calls are on hold or muted

During an attended transfer

During a conference call

Advanced Phone Features
. After detecting the USB
Viewing the
171