Installing And Removing A Fixed Hard Drive; Installing A Fixed Hard Drive - Intel SC5650SCWS Service Manual

11. Re-attach the drive cage EMI shield to the fixed hard drive cage and tighten the thumb screw.
12. Re-install the front bezel assembly. For instructions, see
13. Re-install the left side cover. For instructions, see
14. Plug all peripheral devices and the AC power cable(s) back into the workstation. Power up the workstation.

Installing and Removing a Fixed Hard Drive

You can install up to six fixed hard drives in the fixed hard drive cage that ships with the Intel
SC5650SCWS. Power requirements for each individual hard drive may limit the maximum number of drives that can be
integrated into the workstation system.
NOTE
®
The Intel Workstation System SC5650SCWS does not support all hard drives. See
Information and Software"

Installing a Fixed Hard Drive

CAUTIONS
Fixed drives are NOT hot-swappable. Before removing or replacing the drive, you must first take the
workstation out of service, turn off all peripheral devices connected to the system, turn off the system
by pressing the power button, and unplug the AC power cord from the system or wall outlet.
WARNING
You MUST populate drive bay slots 1, 3, and 5 first. Failure to do so could result in thermal issues
within the chassis..
Intel® Workstation System SC5650SCWS Service Guide
Figure 49. Re-attaching Hard Disk Drive Cage EMI Shield
for a web link to a list of supported hard drives.
"Removing and Installing the Front Bezel Assembly"
"Installing the Left Side Cover".
Hardware Installations and Upgrades
®
Workstation System
"Additional
51