Removing A Dvd-Rom Or Cd-Rom Drive; Figure 37. Removing 5.25-Inch Device Filler Panel From Front Bezel Assembly - Intel SC5650SCWS Service Manual

Hardware Installations and Upgrades
7. If necessary, remove the filler panel from the front bezel assembly.

Figure 37. Removing 5.25-inch Device Filler Panel from Front Bezel Assembly

8. Reinstall the front bezel assembly. For instructions, see
9. Reinstall the left side cover. For instructions, see
10. Reconnect all peripheral devices and the AC power cable(s). Power up the Workstation.

Removing a DVD-ROM or CD-ROM Drive

1. Observe the safety and ESD precautions listed in Appendix A,
2. Power down the workstation and unplug all peripheral devices and the AC power cable.
3. Remove the chassis cover. For instructions, see
4. Remove the Front Bezel Assembly. For instructions, see
5. Disconnect the power and data cables from the rear of the CD-ROM or DVD-ROM drive (see letter "F" in the following
figure). Move latch to the "unlock" position (see letter "D"). Slide CD-ROM or DVD-ROM drive out of the Device Drive Bay
(see letter "C").
Intel® Workstation System SC5650SCWS Service Guide
"Installing the Front Bezel
"Installing the Left Side
"Safety Information".
"Removing the Left Side Cover".
"Removing the Front Bezel
Assembly".
Cover".
Assembly".
44