Replacing Hard Disk Cage Fan - Intel SC5650SCWS Service Manual

Replacing Hard Disk Cage Fan

CAUTIONS
The system fan for the Intel
you must first take the workstation out of service, turn off all peripheral devices connected to the system, turn off the system
by pressing the power button, and unplug the AC power cord from the system or wall outlet.
1. Observe the safety and ESD precautions listed in
2. Power down the workstation and unplug all peripheral devices and the AC power cable.
3. Remove the left side cover. For instructions, see
4. Remove the system fan duct. For instructions, see
5. Disconnect all cables from the fixed hard drive cage.
6. Push the blue plastic release mechanism upward to release the fixed hard drive cage (see letter "A" in the following
figure). Once released, pull the fixed hard drive cage from the chassis (see letter "B").
7. Disconnect the fan power cable from the workstation board. Remove the hard disk cage fan from its snap-in bracket by
pressing the bracket tabs outward (see letter "A" and "B").
Intel® Workstation System SC5650SCWS Service Guide
®
Workstation System SC5650SCWS is NOT hot swappable. Before removing or replacing a fan,
"Safety Information".
"Removing the Left Side
Figure 76. Removing Fixed Drive Cage from Chassis
Cover".
"Removing and Installing System Fan
Hardware Installations and Upgrades
Duct".
67