Install Feed For A Pedestal-Configured Chassis - Intel SC5650SCWS Service Manual
Hide thumbs
Also See for SC5650SCWS:
- Configuration manual (31 pages) ,
- Spares parts list & configuration manual (30 pages)
Table of Contents
Advertisement
10. Make the backplane and workstation board cable connections.
11. Reinstall system fan duct and chassis left side cover if available.
Install Feed for a Pedestal-configured Chassis
NOTE
Do not install feet on your Intel
Only install feet on a pedestal-configured chassis.
1.
Observe the safety and ESD precautions listed in
2.
Power down the workstation and unplug all peripheral devices and the AC power cable.
3.
Lay the chassis down on its right side.
4.
Insert rubber foot into chassis hole (see letter "A" in the following figure). Secure foot to chassis by inserting a pin
through the rubber foot (see letter "B"). Repeat process for remaining feet.
Intel® Workstation System SC5650SCWS Service Guide
Figure 79. Inserting Fixed Drive Cage into Chassis
®
Workstation System SC5650SCWS, if it is to be installed in a rack.
"Safety Information".
Hardware Installations and Upgrades
69
Advertisement
Table of Contents
