Removing And Installing System Fan Duct; Removing The System Fan Duct; Installing The System Fan Duct; Figure 24. Removing System Fan Duct - Intel SC5650SCWS Service Manual

Removing and Installing System Fan Duct

WARNING
This system chassis must be operated with the fan duct installed to ensure proper cooling.

Removing the System Fan Duct

1. Observe the safety and ESD precautions listed in
2. Power down the workstation and unplug all peripheral devices and the AC power cable. Remove the left side cover. For
instructions, see "Removing the Left Side
3. Remove fixed hard disk cage. For instructions, see
4. Remove the system fan duct as shown (see letter "A").

Installing the System Fan Duct

1. Observe the safety and ESD precautions listed in
2. Align the chassis and fan duct alignment rails as shown (see letter "A").
3. Install the system fan duct, making sure the latch engages. (see letter "B").
4. Install fixed hard disk cage. For instructions, see
5. Reinstall the left side cover. For instructions, see
6. Reconnect all peripheral devices and the AC power cable. Power up the workstation.
Caution
Remove the fan duct inlet filler board for the second processor installation (see letter "C").
Intel® Workstation System SC5650SCWS Service Guide
"Safety Information".
Cover".
"Replacing Hard Disk Cage Fan".

Figure 24. Removing System Fan Duct

"Safety Information".
"Replacing Hard Disk Cage
"Installing the Left Side
Hardware Installations and Upgrades
Fan".
Cover".
35