Hardware Installations and Upgrades
Figure 50. Fixed Hard Drive Bay Slot Order (SAS/SATA drives illustrated)
1.
Observe the safety and ESD precautions listed in Appendix A,
2.
Power down the workstation and unplug all peripheral devices and the AC power cable.
3.
Remove the left side cover. For instructions, see
4.
Remove the front bezel assembly. For instructions, see
5.
Loosen thumb screw and remove the drive cage EMI shield (see letter "A" in the following figure).
Intel® Workstation System SC5650SCWS Service Guide
Figure 51. Removing EMI Shield from Fixed Hard Drive Cage
"Safety
Information".
"Removing the Left Side
Cover".
"Removing the Front Bezel
Assembly".
52