Firmware Update - Inspur NF5180M4 User Manual

3.2.7 Save & Exit Menu
Save & Exit Menu Menu Interface Instruction Table
Interface Parameters
Save Changes and Exit
Discard Changes and Exit
Save Changes and Reset
Discard Changes and Reset
Save Changes
Discard Changes
Restore Defaults
Save as user Defaults
Restore user Defaults
Boot Override

3.3Firmware Update

For BIOS update, you could select to update in DOS or OS.
1) Use afudos tool to update BIOS in DOS
System boots from USB DOS startup disk, enters the directory containing afudos tool,
while bin files of the corresponding new BIOS version have been put into this folder, execute
command: afudos BIOS.bin /b /p /n /x /me to update BIOS and ME, for BIOS.bin – bin files
of the new BIOS version, an example is as shown in the following figure:
Function Description
To Save and exit
To abandon changes and exit.
To save changes and reboot
To abandon changes and reboot
To save changes.
To abandon changes.
To restore factory settings.
To save as defaults.
To restore user defaults.
To reload boot device, you could select all boot
devices in the following.
BIOS Configuration
４７