Inspur NF5180M4 User Manual page 46

1) Add User operation
a 、 Select the User Name option, and press Enter to pop up the User Name box, enter
the user name to set manually, after configuration is completed, press Enter to confirm.
b 、 Select the User Password option, and press Enter to pop up the User Password box,
enter the user password to set manually, after configuration is completed, press Enter to
confirm.
c 、 Channel NO is set to 1 or 8.
d 、 The User Privilege Limit option, sets privilege for new user, after configuration
is completed, press Enter, to pop up the BMC USER SETTINGS INFO box, when system
prompts "Set User Access Command Passed", press Enter and then OK to confirm, the new
user is added successfully, and the example is as shown in the following figure:
BIOS Configuration
４１