Inspur NF5180M4 User Manual page 13

SAS Backplane
SAS3.0 backplane
Network Card
Network Card ontroller
Management Chip
Management Chip
PCI Extension Slot
Hard Disk
Hard Drive Type
External Storage Driver
CD Driver
Drive U Disk
Power Supply
Specification
Power Input
Physical Specification
External Dimension of
Package
８
It supports hog-plugging SAS/SATA/SSD hard disks.
The mainboard integrates 1 Intel I350 dual Gigabit network card,
providing two 1000M adaptive RJ45 network ports.
It supports 1 network sub-card.
It integrates 1 independent 1000Mbps network interface, which is
used in IPMI remote management.
● There're 2 onboard PCI Express 3.0 x24 slots on the mainboard
(used to support PCI-E Riser card)
● Riser card supports horizontal cards and full-height cards.
● Standard configuration:
PCIE0 slot (from CPU0) installed with a Riser card could support 1
PCI Express 3.0x8 slots.
● Full configuration :
PCIE0 slot (from CPU0) installed with a Riser card could support 1
PCI Express 3.0x8 slots;
PCIE1 slot (from CPU1) installed with a Riser card could support 1
PCI Express 3.0x8 slots.
Front set 2.5/3.5 inches SAS, SATA and SSD hard disks. (Subject
to actual type you purchased)
Front set 2.5/3.5 inch SAS, SATA and SSD hard disks; (Subject to
actual type you purchased)
It supports Slim SATA interface DVD driver (9.5 mm)
External USB drive.
Optional drive U disk.
Output power of sing/Double power 550W/800W and above; 1+1
redundancy; 2 power modules; it supports PMBus power supply,
and implements Node Manager 3.0 function.
Please refer to power input on nameplate tag of the host.
635 width × 215 height × 955 depth (unit: mm)