Inspur NF5180M4 User Manual page 8

Table of Contents

Advertisement

14.
Equipment intended for installation in Restricted Access Location.
équipement conçu pour une installation dans Emplacement à accès restraint.
Note:
In order to help you use the equipment, the following considerations can help avoid the
occurrence of problems that may damage the components or cause data loss etc.
1.
In case of the following cases, please unplug the power line plug of products from the
power socket and contact customer service department of Inspur:
1)
The power cables, extended cables or power plugs are damaged.
2)
The products get wet by water.
3)
The products have fallen off or been damaged.
4)
Objects fall into the products.
5)
When operating according to the operation instructions, the products cannot
function normally.
2.
If the system becomes damp, please dispose according to the following steps:
1)
Switch off the power supplies of the system and the equipment, disconnect them
with the power socket, wait for 10 to 20 minutes, and then open the cover of the
host.
2)
Move the equipment to the ventilation place to dry the system at least for 24 hours
and make sure that the system is fully dried.
3)
Close the cover of the host, re-connect the system to the power socket, and then
start the equipment.
4)
In case of operation failure or abnormal situation, please contact Inspur and get
technical support.
3.
Pay attention to the position of the system cables and power cables, wire them in places
not to be stepped on or knocked down and ensure not to place other objectives on the
cables.
4.
Before dismounting the cover of host or contacting the internal components, you shall
cool down the equipment first; to avoid damaging the main-board, please power off the
system and wait for 5 seconds, and then dismount the components from the main-board
or disconnect the connection of peripheral equipment of the system.
5.
If there are modulator-demodulator, telecommunication or local area network options in
the equipment, please pay attention to the following matters:
Safety Introduction
 3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents