Inspur NF5180M4 User Manual page 37

c 、 After entering SATA RAID configuration interface, menu list information,
information of hard disk connecting to SATA controller (hard disk ID number, hard disk type,
hard disk capacity as well as whether hard disk is a volume member etc.), existed RAID
volume information (including volume ID number, name, RAID level, capacity, status,
whether information bootable) will all display.
Press Key
↑↓
TAB
Enter
Esc
d. SATA RAID configuration interface has the following 4 executable menus:
Create RAID Volume
Delete RAID Volume
Reset Disks to Non-RAID
Exit
a) Create RAID Volume Menu
After entering SATA RAID configuration interface, you could use up and down arrows
to select this menu, then press [Enter] to create an RAID volume menu, or directly enter the
number before the menu to create an RAID volume menu, for other menu operations are
similar, so it will not be repeated here. A Create RAID Volume instance is as shown in the
following figure:
３２
Description
Used to move cursor in different menus or to change values of menu
options.
To select the next menu setting option.
To select a menu.
To exit menu or return to previous menu from sub-menu.
To create an RAID volume.
To delete an existed RAID volume.
To reset hard disks in RAID volume, and to restore them to
non-RAID status.
To exit SATA Host RAID configuration interface.