Firmware Update - Inspur NP5570M4 User Manual

3.2.7 Save & Exit Menu
Save & Exit Menu Menu Interface Instruction Table
Interface Parameters
Save Changes and Exit
Discard Changes and Exit
Save Changes and Reset
Discard Changes and Reset
Save Changes
Discard Changes
Restore Defaults
Save as user Defaults
Restore user Defaults
Boot Override

3.3 Firmware Update

For BIOS update, you could select to update in DOS or OS.
1) Use afudos tool to update BIOS in DOS
System boots from USB DOS startup disk, enters the directory containing afudos tool, while
bin files of the corresponding new BIOS version have been put into this folder, execute
command: afudos BIOS.bin /b /p /n /x /me to update BIOS and ME, for BIOS.bin – bin files
of the new BIOS version, an example is as shown in the following figure:
Function Description
To save changes and exit
To discard changes and exit
To save changes and reset
To discard changes and reset
To save changes
To discard changes
To restore defaults
To save as user defaults
To restore user defaults
To reload boot device, you could select all boot devices in
the following.
BIOS Configuration
４５