Inspur NF5180M4 User Manual page 32

Energy Performance Tunning Menu Interface Instruction Table
Interface Parameters
Energy Performance Tunning
Energy Performance BIAS
Workload Configuration
3.2.3.3 QPI Configuration
QPI Configuration Menu Interface Instruction Table
Interface Parameters
QPI Satus
Degrade Precedence
Link Speed Mode
Link Frequency Select
Link L0p Enable
Link L1 Enable
E2E Parity Enable
COD Enable
Early Snoop
Function Description
To select BIOS or OS to carry out energy performance
tuning
Energy performance management settings
Workload configuration
Function Description
QPI status display sub-menu
To degrade to priority settings.
Link speed mode settings
Link frequency selection settings
Link power saving mode settings, which is made when
bandwidth is half of the peak bandwidth..
In the case that system is extremely idle, turn off QPI
Link.
E2E parity check enabling settings
COD enabling settings
Early Snoop settings
BIOS Configuration
２７