Inspur NF5180M4 User Manual page 89

b 、 Test on another display
d 、 If no solution could be achieved via the above operation, please contact the
distributor customer service.
4) Front panel status indicator alarms
Description: The server is under normal operation, but system status indicator on
front control panel flashes or the red indicator is on to alarm.
Operation steps:
Please check whether all power module indicators are green constant, if so, you
could login BMC web interface to collect logs, and contact the distributor customer
service.
5) Memory capacity incomplete
Description: Memory capacity viewed via the operation system does not correspond
with physical memory capacity.
Operation steps:
a 、 Ensure all memories have been correctly installed in place, and memories of
correct type have also been configured.
b 、 Enter BIOS setup to view memory capacity, if it could be completely identified
in BIOS setup, this may lie in the limitation on memory capacity set by the
operation system. Otherwise, please contact the distributor customer service.
6) Keyboard and mouse are not available
Description: Neither keyboard nor mouse could be operated normally.
Operation steps:
a 、 Make sure whether cable connection of keyboard or mouse is correct and firm.
b 、 Test other parts to verify whether it is a mouse or keyboard fault.
c 、 Retest the machine via power on/off.
d 、 Reboot and enter cmos or raid configuration interface to test keyboard or
mouse performance, when tested in a non-system situation, if keyboard or
mouse performance turns out to be normal, a system fault could be considered;
if keyboard or mouse fault still exists, a mainboard interface fault could be
considered, and you could contact the distributor technical support.
８４