Table of Contents
Advertisement
3 BIOS Configuration
This chapter introduces BIOS function setup and mainboard jumper of the server. All
operations described in this section are only limited to operators or administrators with
system maintenance qualification.
BIOS is a basic input and output system. The system parameter and the hard drive
parameter can be adjusted through special set program. BIOS has great influence on the
system start and running so that setting parameters improperly may arose the conflict among
the hardware resource, or fall down the system run performance. Hence understanding the
BIOS setup is significant to the configuration of your server. If no especial requirement, you
are suggested to use the default value and not alter the parameters optionally.
1. Before the server BIOS setup is altered, please record the corresponding original setup. Hence
when there are operating problems in the system due to the option altered, the setup can revert.
2. Ordinarily the factory default system value is the optimized setup. Don't try to alter the
parameters before you understand their denotations.
3. The common setup is introduced in detail in this paper. The less referred options in the
application procedure are simply explained or not.
4. The content of the BIOS is diverse based on the different configurations of the products; hence
the detailed introduction is elided.
3.1 System BIOS Configuration Methods
Power on the server, system starts to boot, when the following content appears below
The distributor logo on the screen:
"Press <DEL> to SETUP or <TAB> to POST or <F12> to PXE Boot.", press [DEL]
button, when "Entering Setup..." appears on bottom right on the screen, it will enter system
BIOS configuration later, and you could select options using arrow buttons on BIOS main
menu to enter sub-menu.
Note:
Options in grey are not available. Options with symbol "
BIOS Configuration
", have a sub-menu.
１５
Hide quick links:
Advertisement
Table of Contents
