Table of Contents
Advertisement
Boot configuration Menu Interface Instruction Table
Interface Parameters
Bootup NumLock State
Boot Options Retry
Quiet Boot
Boot Option Priorities
Boot Option #X
Hard Driver BBS Priorities
Network Device BBS Priorities
To set BIOS boot operation:
Enter Boot menu, move the cursor to Boot option #X via up and down arrows to select,
and set system boot sequence, with X set to 1, 2, 3 etc., while an example is as shown in the
following figure:
Taking Boot option #1 as an example, you could set the first boot device for the system:
Move the cursor to Boot option #1, and press Enter, to pop up the boot option for selection:
i.e. IBA GE slot 0400 v1543, UEFI: Built-in EFI Shell, UEFI:USB2.O DISK 1100, USB2.O
DISK 1100 etc., select one via up and down keys, i.e. USB2.O DISK 1100, and press Enter,
to select USB DOS disk as the first boot device for the system.
４６
Function Description
Numlock keys status settings after bootup.
The booting device polling settings
To boot quietly, set this option to Enabled, and boot logo
displays as that set by manufacturer, disabled, boot logo
displays as AMI's default logo.
Boot option priority settings
Hard disk device BBS priority settings
Network device BBS priority settings
Hide quick links:
Advertisement
Table of Contents
