Inspur NF5180M4 User Manual page 38

System displays the following menu options:
Name
RAID Level
Disks
Strip Size
Capacity
After completing the above configuration, please select [Create Volume], and press
enter, system prompts: "WARNING:ALL DATA ON THE SELECTED DISKS WILL BE
LOST. Are you sure you want to create this volume ?(Y/N):".
To create an RAID volume, please enter "Y", a volume will be created, and all data on
the selected disk will be lost.
Otherwise, please enter "N", to exit volume creation.
Here we enter "Y" to create an RAID volume, after creation completed, return to SATA Host
RAID configuration main interface, and the created RAID volume will display in RAID volume.
Please enter a volume label name less than 16 characters without
containing any special character.
Please select RAID volume level, if no volume has been created at
present, there're four volume levels of RAID0(Stripe), RAID1(Mirror),
RAID10(RAID0+1) and RAID5(Parity)for selection, please select
volume level according to actual requirements.
RAID0: This RAID volume is allowed to be made on 2 or above hard
disks.
RAID1: This RAID volume is allowed to be made on 2 hard disks.
RAID10: This RAID volume is allowed to be made on 4 hard disks,
which is only available when hard disk quantity is 4 or above.
RAID5 (Parity): This RAID volume is allowed to be made on 3 or
above hard disks.
Select hard disks to make RAID volume, press enter after this option is
selected, system will enter hard disk selection interface, please select
hard disks to make RAID volume using space key accordingly, and
then press enter to return to volume create menu.
Please select strip size, only RAID0 and RAID5 volumes could select
this option.
Set volume capacity, and the default value is the max. volume capacity.
BIOS Configuration
３３