Table of Contents
Advertisement
BMC network configuration on BIOS setup interface, is to configure BMC management
network via BIOS.
1)
If no operation is carried out in BIOS, by default, it will read BMC, and configure its
Dedicated management port and shareline management port, taking Dedicated management
port as an example, the BIOS reading configuration is as shown in the following figure:
2)
BIOS could carry out Dynamic and Static network settings on BMC Dedicated
management port and sharelink management port, taking Dedicated management port as an
example, to set a BMC Static IP as follows:
a.
Set the Configuration Address Source option to [Static]
b.
Select the Station IP Address option, and press Enter, to pop up the Station IP Address
window, enter the Static IP to set manually, after configuration is completed, press Enter to
confirm, and an example is as shown in the following figure:
c.
Select the Subnet Mask option, and press Enter, to pop up the Subnet Mask box, enter
the Subnet Mask to set manually, after configuration is completed, press Enter to confirm,
and an example is as shown in the following figure:
d.
Select the Router IP Address option, and press Enter, to pop up the Router IP Address
box, enter the Router IP Address to set manually, after configuration is completed, press
BIOS Configuration
３９
Hide quick links:
Advertisement
Table of Contents
