Firmware Update - Inspur TS860M5 User Manual

Exit Menu Interface Instruction Table
Interface Parameters
Exit Saving Changes
Save Change Without Exit
Exit Discarding Changes
Load Optional Defaults
Load Custom Defaults
Save Custom Defaults
Discard Changes

8.3 Firmware Update

For BIOS update, you could select to update in UEFI Shell or OS.
8.3.1 Update BIOS in UEFI Shell
1) When Inspur Logo appears during system startup, there is a prompt "Press <ESC> to Front
Page or <DEL> to Setup or <F11> to Boot Menu or <F12> to PXE Boot." on the bottom of the
screen. Press F11 to start the Boot Menu, and enter EFI shell.
2) Enter the disk in which the BIOS flash toolkit H2OFFT-Sx64.efi resides, enter the flash
toolkit folder, and BIOS.bin is the 32M BIOS+ME file to be updated. Execute the command
74
Function Description
To save changes and exit system setup
To save changes and do not exit system setup
To abandon changes and exit system setup
To load the optional default setting of the system setup
To load the custom default setting of the system setup
To save as custom default setting of the system setup
To abandon changes