Inspur NF5180M4 User Manual page 30

Advanced Power Management Configuration Menu Interface Instruction Table
Interface Parameters
Power Technology
Config TDP
CPU P State Control
CPU C State Control
Energy Performance Tunning
Socket RAPL Configuration
DRAM RAPL Configuration
1) CPU P State Control
CPU P State Control Menu Interface Instruction Table
Interface Parameters
EIST(P-states)
Turbo Mode
Function Description
To set power management
TDP settings
CPU P State control sets sub-menu, and starts when Power
Technology is set to [Custom].
CPU C State control sets sub-menu, and starts when Power
Technology is set to [Custom].
CPU performance and energy tuning sub-menu
Turbo power limit settings sub-menu, and EIST option
requires to be set to [Enabled].
DRAM RAPL configuration sub-menu
Function Description
EIST switching settings
Turbo mode switching settings
BIOS Configuration
２５