Output Display; Menu Structure; Setting Parameter Value - ABB ACS 400 User Manual

Output Display

When the control panel is powered up, the panel displays the actual output frequency. Whenever
the MENU button is pressed and held, the control panel resumes this OUTPUT display.
To toggle between output frequency and output current, press the UP or DOWN button.
To set the output frequency, press ENTER. Pressing the UP/DOWN buttons changes the reference
immediately. Press ENTER again to return to OUTPUT display.

Menu Structure

ACS 400 has a large number of parameters. Of these, only the so-called basic parameters are
initially visible. The menu function -LG- is used to make the full parameter set visible.
OUTPUT display

Setting Parameter Value

Press ENTER to view the parameter value.
To set a new value, press and hold ENTER until SET is displayed.
Note! SET blinks if the parameter value is altered. SET is not displayed if the value cannot be
altered.
Note! To view the parameter default value, press the UP/DOWN buttons simultaneously.
ACS 400 User's Manual
LOC ENTER
Hz
OUTPUT
A
LOC
ENTER
OUTPUT
Parameter groups
PAR
http://nicontrols.com
LOC
OUTPUT
SET
ENTER
ENTER
s
SET
MENU
ENTER
Hz
Parameters
31