ABB ACS 400 User Manual page 111
Ac drives for speed control
Hide thumbs
Also See for ACS 400:
- User manual (160 pages) ,
- Installation manual (4 pages) ,
- User manual (44 pages)
Table of Contents
Advertisement
Group 32: Supervision
Parameters of this group are used together with relay output parameters 1401
1402
2. Any two parameters of the Operating Data Group (Group 1) can be
RELAY OUTPUT
supervised. Relays can be configured to be energized when the values of the supervised
parameters are either too low or too high.
Code Description
3201 SUPERV 1 PARAM
First supervised parameter number of the Operating Data group (Group 01).
3202 SUPERV 1 LIM LO
First supervision limit low. Display of this parameter depends on the selected supervised parameter (3201).
3203 SUPERV 1 LIM HI
First supervision limit high. Display of this parameter depends on the selected supervised parameter
(3201).
3204 SUPERV 2 PARAM
Second supervised parameter number of the Operating Data group (Group 01).
3205 SUPERV 2 LIM LO
Second supervision limit low. Display of this parameter depends on the selected supervised parameter
(3204).
3206 SUPERV 2 LIM HI
Second supervision limit high. Display of this parameter depends on the selected supervised parameter
(3204).
100
http://nicontrols.com
1 and
RELAY OUTPUT
ACS 400 User's Manual
Advertisement
Table of Contents
