Output Display; Menu Structure - ABB ACS 400 User Manual

Output Display

When the control panel is powered up, the panel displays a selection of actual values, see Figure
22. Whenever the MENU button is pressed and held, the control panel resumes this OUTPUT
display.
Output current
Figure 22 Output display variables.
The frequency reference can be modified using the UP/DOWN buttons when the reference display
is underlined. Pressing the UP or DOWN buttons changes the reference immediately.
The reference can be modified in local control mode, but also in remote control mode if the
ACS 400 is programmed for that type of operation.

Menu Structure

ACS 400 has a large number of parameters. Of these, only the so-called basic parameters are
initially visible. See "Selecting Full Parameter Set" on page 28 for details on specifying the full
parameter set.
The menu consists of parameter groups and menu functions.
26
Torque Reference frequency
6 È $ÃC“
0.0 Hz
OUTPUT
http://nicontrols.com
Cursor is visible when reference
can be modified
Actual output frequency
ACS 400 User's Manual