4.17
Error Clear Function
When an error occurs, the error can be cleared on the system monitor.
By clicking the
(Un\G19) is cleared, and the ERR. LED turns off. This operation is the same as the one that uses Error clear request
(YF).
However, the error history cannot be cleared with the button.
For the error clearing method using Error clear request (YF), refer to the following.
• Error clear request (YF) (
[Diagnostics]
76
button in the system monitor, the latest error code stored in Latest error code
Page 88, Section 5.2.2 (7))
[System Monitor...]
Error Module