Mitsubishi Electric MELSEC-Q series User Manual page 171

4.
Display the refresh parameter setting window, and configure the setting as follows.
Project window
5.
Write the set parameters to the CPU module on the master station. Then reset the CPU module or
turn off and on the power supply of the programmable controller.
[Online]
(6) Setting on the remote I/O station
1.
Create a project on GX Works2.
Select "QCPU (Q mode)" for "Series", and select "QJ72LP25/QJ72BR15 (RemoteI/O)" for "Type".
[Project]
[Parameter] [Network Parameter]
[Write to PLC...]
RESET
or Power OFF
[New...]
[Ethernet/CC IE/MELSECNET]
button
ON
CHAPTER 9 PROGRAMMING
169
9