Details Of Buffer Memory Addresses - Mitsubishi Electric MELSEC-Q series User Manual

6.2

Details of Buffer Memory Addresses

The following describes the details of buffer memory addresses.
(1) Conversion enable/disable setting (Un\G0)
Set whether to enable or disable the conversion for each channel.
After setting CH Input range setting (Un\G150 to Un\G157) depending on the CT connected, set Enable (0).
For details on the conversion enable/disable function, refer to the following.
• Conversion Enable/Disable Function (
(a) Enabling the setting
Turn on then off Operating condition setting request (Y9) to enable the setting.
(b) Default value
All channels are set to Disable (1).
104
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5
0 0 0 0 0 0 0
b8 to b15 are fixed to "0".
Page 35, Section 4.3)
b4 b3 b2
0 CH8 CH7 CH6 CH5 CH4 CH3
0: Enable
1: Disable
b1 b0
CH2 CH1