Mitsubishi Electric MELSEC-Q series User Manual page 109

(6) Offset/gain setting mode Offset specification (Un\G22), Offset/gain setting
mode Gain specification (Un\G23)
Specify the channel to adjust the offset/gain setting.
• Offset/gain setting mode Offset specification (Un\G22): channel to adjust the offset
• Offset/gain setting mode Gain specification (Un\G23): channel to adjust the gain
Offset/gain setting mode Offset specification (Un\G22)
Offset/gain setting mode Gain specification (Un\G23)
(a) Default value
All channels are set to Not specified (0).
● Multiple channels can be simultaneously set. In that case, set Not specified (0) to either of Offset/gain setting mode Offset
specification (Un\G22) and Offset/gain setting mode Gain specification (Un\G23). When the settings for both of them are
configured at the same time, the offset/gain setting mode error (error code: 500) occurs.
● If the user range is not used in CH Input range setting (Un\G150 to Un\G157) when the offset/gain setting is set, the
error (error code: 51) occurs.
● For details on the offset/gain setting, refer to the following.
• Offset/gain Setting (
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5
0 0 0 0 0
0 0 0 0 0
b8 to b15 are fixed to "0".
Page 148, Section 8.5)
CHAPTER 6 BUFFER MEMORY
b4 b3
0 0 0 CH8 CH7 CH6 CH5 CH4
0 0 0 CH8 CH7 CH6 CH5 CH4
0: Not specified
1: Specified channel
b2 b1 b0
CH3 CH2 CH1
CH3 CH2 CH1
6
107