Mitsubishi Electric MELSEC-Q series User Manual page 179

CHAPTER 9 PROGRAMMING
9
Set CH1 Input range setting.
Set CH2 Input range setting.
Set CH3 Input range setting.
Enable CH1 to CH3 Digital
conversion.
CH2 Average time/Average number of
times/Moving average/Time constant
settings
CH3 Average time/Average number of
times/Moving average/Time constant
settings
Set CH1 to CH3 averaging
process setting.
Set conversion speed.
Activate CH1 Input signal error
detection.
Set CH2 and CH3 Warning output.
Set CH2 Process alarm lower
lower limit value.
Set CH2 Process alarm lower
upper limit value.
Set CH2 Process alarm upper
lower limit value.
Set CH2 Process alarm upper
upper limit value.
Set CH3 Rate alarm warning
detection period.
Set CH3 Rate alarm upper limit
value.
Set CH3 Rate alarm lower limit
value.
Set CH1 Peak current detection
setting.
Set CH1 Peak current detection
time.
Set CH1 Peak current detection
value.
Write to the buffer memory.
177