Mitsubishi Electric MELSEC-Q series User Manual page 240

Device
CH8 User range setting offset value
+34
S
CH8 User range setting gain value
+35
S
*1 These control data are unnecessary to be set. When they are set, offset/gain setting values are not correctly read out.
(3) Functions
• This instruction reads out the offset/gain set values in a user range setting of the CT input module to the
CPU module.
• The interlock signal of G(P).OGLOAD includes a completion device
device
D
(a) Completion device
The device turns on at the END processing for the scan where the G(P).OGLOAD instruction is completed, and
turns off at the next END processing.
(b) Completion status indication device
This device turns on or off depending on the status of the G(P).OGLOAD instruction completion.
• Normal completion: the device remains off.
• Error completion: the device turns on at the END processing for the scan where the G(P).OGLOAD
instruction is completed, and turns off at the next END processing.
Sequence program
G(P).OGLOAD
instruction
Completion device D
Completion status
indication device D +1
(4) Errors
The instruction has no errors.
238
Item
+1.
END END
processing processing
ON
OFF OFF
OFF
OFF
Setting data


D
Execution completion of
the G(P).OGLOAD instruction
Setting range Set by

System

System
and a completion status indication
END END
processing processing
ON
OFF
ON: Execution failed
OFF: Execution succeeded
1 scan