Protocol; Port And Protocol Combinations - GE T60 Instruction Manual

5 SETTINGS
When a 0 value is involved in a change, the changes to the
T60 is restarted.
NOTE
Do not set more than one protocol to the same TCP/UDP port number, as this results in unreliable operation of
those protocols.
i) PROTOCOL
The Protocol menu setting allows selection of one of the following protocols: DNP 3.0, IEC60870-104, or IEC60870-103.
For any change to take effect, restart the unit.
The table shows which of DNP 3.0, IEC 60870-5-104, IEC 60870-5-103, and IEC 61850 protocols are operational on the
RS232, RS485, and Ethernet ports. It shows all possible combinations of the
tings.
Table 5–5: PORT AND PROTOCOL COMBINATIONS

PROTOCOL

DNP CHANNEL 1(2) PORT
SETTING SETTINGS
DNP Channel 1: Eth TCP
Channel 2: Eth TCP
Channel 1: Eth TCP
Channel 2: none
Channel 1: none
Channel 2: Eth TCP
Channel 1: Eth UDP
Channel 2: none
Channel 1: Eth TCP
Channel 2: RS485
Channel 1: Eth TCP
Channel 2: RS232
Channel 1: Eth UDP
Channel 2: RS485
Channel 1: Eth UDP
Channel 2: RS232
Channel 1: RS485
Channel 2: Eth TCP
Channel 1: RS232
Channel 2: Eth TCP
Channel 1: RS485
Channel 2: RS232
Channel 1: RS232
Channel 2: RS485
Channel 1: RS485
Channel 2: none
IEC 104
IEC 103
GE Multilin
MODBUS TCP PORT NUMBER
RS232 RS485
Modbus Modbus
Modbus Modbus
Modbus Modbus
Modbus Modbus
Modbus DNP
DNP Modbus
Modbus DNP
DNP Modbus
Modbus DNP
DNP Modbus
DNP DNP
DNP DNP
Modbus DNP
Modbus Modbus
Modbus IEC 103
T60 Transformer Protection System
5.2 PRODUCT SETUP
setting take effect when the
and
PROTOCOL DNP CHANNEL 1(2) PORT
ETHERNET
DNP, Modbus, IEC 61850
DNP, Modbus, IEC 61850
DNP, Modbus, IEC 61850
DNP, Modbus, IEC 61850
DNP, Modbus, IEC 61850
DNP, Modbus, IEC 61850
DNP, Modbus, IEC 61850
DNP, Modbus, IEC 61850
DNP, Modbus, IEC 61850
DNP, Modbus, IEC 61850
Modbus, IEC 61850
Modbus, IEC 61850
Modbus, IEC 61850
IEC 104, Modbus, IEC 61850
Modbus, IEC 61850
5
set-
5-37