Sources; Phase Current Metering - GE T60 Instruction Manual

6 ACTUAL VALUES
The daily rate loss of life is summarized at 00:00 h, and displayed for the next 24 hour period. The transformer accumulated
loss of life in hours is also available. It can be reset by either changing the

COMMANDS CLEAR RECORDS
a) MAIN MENU

PATH: ACTUAL VALUES METERING
 SOURCE SRC 1

MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
This menu displays the metered values available for each source.
Metered values presented for each source depend on the phase and auxiliary VTs and phase and ground CTs assignments
for this particular source. For example, if no phase VT is assigned to this source, then any voltage, energy, and power val-
ues will be unavailable.
b) PHASE CURRENT METERING

PATH: ACTUAL VALUES METERING
 PHASE CURRENT
 SRC 1
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
GE Multilin

CLEAR LOSS OF LIFE RECORDS

SOURCE SRC1(6)
 PHASE CURRENT
 SRC 1
 GROUND CURRENT
 SRC 1
 PHASE VOLTAGE
 SRC 1
 AUXILIARY VOLTAGE
 SRC 1
 POWER
 SRC 1
 ENERGY
 SRC 1
 DEMAND
 SRC 1
 FREQUENCY
 SRC 1
 CURRENT HARMONICS
 SRC 1
 
SOURCE SRC 1 PHASE CURRENT
SRC 1 RMS Ia: 0.000
b: 0.000 c: 0.000
SRC 1 RMS Ia:
0.000 A
SRC 1 RMS Ib:
0.000 A
SRC 1 RMS Ic:
0.000 A
SRC 1 RMS In:
0.000 A
SRC 1 PHASOR Ia:
0.000 A
SRC 1 PHASOR Ib:
0.000 A
T60 Transformer Protection System
XFMR INITIAL LOSS OF LIFE
command.
See page 6–17.
See page 6–18.
See page 6–18.
See page 6–19.
See page 6–19.
See page 6–20.
See page 6–20.
See page 6–21.
See page 6–22.
A
0.0°
0.0°
6.3 METERING
setting or through the

6.3.3 SOURCES

6
6-17