Teleprotection Inputs; Contact Outputs - GE T60 Instruction Manual

6 ACTUAL VALUES

PATH: ACTUAL VALUES STATUS
 TELEPROTECTION
 INPUTS
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
The present state of teleprotection inputs from communication channels 1 and 2 are shown here. The state displayed will
be that of corresponding remote output unless the channel is declared failed.

PATH: ACTUAL VALUES STATUS
 CONTACT OUTPUTS

MESSAGE
MESSAGE
The present state of the contact outputs is shown here. The first line of a message display indicates the ID of the contact
output. For example, 'Cont Op 1' refers to the contact output in terms of the default name-array index. The second line of
the display indicates the logic state of the contact output.
For form-A contact outputs, the state of the voltage and current detectors is displayed as Off, VOff, IOff, On, IOn,
and VOn. For form-C contact outputs, the state is displayed as Off or On.
NOTE
GE Multilin


TELEPROTECTION INPUTS

TELEPROTECTION
INPUT 1-1: Off
TELEPROTECTION
INPUT 1-2: Off

TELEPROTECTION
INPUT 1-16: Off
TELEPROTECTION
INPUT 2-1: Off
TELEPROTECTION
INPUT 2-2: Off

TELEPROTECTION
INPUT 2-16: Off


CONTACT OUTPUTS

Cont Op 1
Off
Cont Op 2
Off

Cont Op xx
Off
T60 Transformer Protection System
6.2.4 TELEPROTECTION INPUTS
Range: Off, On
Range: Off, On
Range: Off, On
Range: Off, On
Range: Off, On
Range: Off, On
6.2.5 CONTACT OUTPUTS
Range: On, Off, VOff, VOn, IOn, IOff
Range: On, Off, VOff, VOn, IOn, IOff
Range: On, Off, VOff, VOn, IOn, IOff
6.2 STATUS
6
6-5