Menu 0 (Linear); Menu Structure - Emerson Mentor MP Advanced User's Manual

Parameter
Menu 23
structure
IO
Menu 0 Parameter
0.81 7.15 Analog input 3 mode
0.82 7.01 Analog input 1
0.83 7.02 Analog input 2
0.84 7.03 Analog input 3
0.85 8.01 I/O state 1
0.86 8.02 I/O state 2
0.87 8.03 I/O state 3
0.88 8.04 I state 4
0.89 8.05 I state 5
0.90 8.06 I state 6
5.24

Menu 0 (linear)

Menu 0 is used to bring together various commonly used parameters for
basic easy set up of the drive.
Appropriate parameters are copied from the advanced menus into menu
0 and thus exist in both locations.
For further information, refer to section 5.22 Menu 23 Header
definitions on page 199.
Figure 5-36 Menu 0 copying
Menu 0
0.04 5
0.05 0
0.06 150
202
Keypad and
Description
Menu 2
2.21 5
Menu 1
1.14
Menu 4
150
4.07
www.onxcontrol.com
Advanced parameter
format
Parameter description
5.25

Menu structure

The drive parameter structure consists of menus and parameters.
Display
The drive initially powers up in sub menu mode. Once Level 2 access
in01
(L2) has been enabled (refer to Pr 11.44 (SE14, 0.35) the left and right
in02
buttons are used to navigate between numbered menus.
in03
For further information, refer to section 2.7 Parameter access level and
in04
security on page 13.
in05
Figure 5-37 Menu structure
in06
in07
Menu 0 Menu 1
Pr 0.00 Pr 1.00
in08
Pr 0.01 Pr 1.01
in09
Pr 0.02 Pr 1.02
in10
Pr 0.88 Pr 1.49
Pr 0.89 Pr 1.50
Pr 0.90 Pr 1.51
The menus and parameters roll over in both directions.
For example:
• If the last parameter is displayed, a further press will cause the
display to roll-over and show the first parameter.
When changing between menus the drive remembers which parameter
was last viewed in a particular menu and will display that parameter. The
menus and parameters roll over in both directions.
0
Serial comms
protocol
descriptions
Menu 2 Menu 22 Menu 23
Pr 2.00 Pr 22.00
Pr 2.01 Pr 22.01
Pr 2.02 Pr 22.02
Pr 2.39 Pr 22.38
Pr 2.40 Pr 22.39
Pr 2.41 Pr 22.40
Moves between Menus
Mentor MP Advanced User Guide
Performance
Pr 23.00
Pr 23.01
Pr 23.02
Pr 23.09
Moves
Pr 23.10
between
Pr 23.11
parameters
Issue Number: 4