T5/6 Analog Input 1 Scaling; T5/6 Analog Input 1 Invert; T5/6 Analog Input 1 Destination; T7 Analog Input 2 Mode - Emerson Mentor MP Advanced User's Manual

Parameter Keypad and
structure
MP700A6(R)
MP825A6(R)
MP1200A6(R)
MP1850A6(R)
7.08

T5/6 analog input 1 scaling

Bit SP
Coding
Range 0.000 to 40.000
Default 1.000
Update rate Background read
7.09

T5/6 analog input 1 invert

Bit SP
Coding
1
Default 0
Update rate Background read
7.10

T5/6 analog input 1 destination

Bit SP
Coding
Range Pr 0.00 to Pr 22.99
Default Pr 1.36
Update rate Read on drive reset
7.11

T7 analog input 2 mode

Bit SP
Coding
Range 0 to 6
Default 6
Update rate Background read
The following modes are available for the analog inputs 2 and 3.
In modes 2 and 3 a current loop loss trip is generated if the input current falls below 3 mA.
In modes 4 and 5 the analog input level goes to 0.0 % if the input current falls below 3 mA.
Modes 7, 8 and 9 are only available with analog input 3.
Parameter value Parameter string
0 0-20
1 20-0
2 4-20.tr
3 20-4.tr
4 4-20
5 20-4
6 VOLt
7 th.SC
8 th
9 th diSp
Mentor MP Advanced User Guide
Issue Number: 4
format
Parameter description
100
94
110
FI DE TE VM DP ND
3
FI DE TE VM DP ND
FI DE TE VM DP ND
1 2
FI DE TE VM DP ND
1
Mode
0 - 20 mA
20 - 0 mA
4 - 20 mA with trip on loss
20 - 4 mA with trip on loss
4 - 20 mA with no trip on loss
20 - 4 mA with no trip on loss
Voltage mode
Thermistor with short circuit detection
Thermistor without short circuit detection
Thermistor display only with no trip
www.onxcontrol.com
Advanced parameter
descriptions
95 90
90 85
100 95
RA NC NV PT US RW BU
1 1
RA NC NV PT US RW BU
1 1
RA NC NV PT US RW BU
1 1 1
RA NC NV PT US RW BU
1 1
Comments
Trip if I < 3 mA
Trip if I < 3 mA
TH trip if R > 3 k 3
TH reset if R < 1 k 8
THS trip if R < 50 R
TH trip if R > 3 k 3
TH reset if R < 1 k 8
Serial comms
Performance
protocol
PS
1
PS
PS
1
PS
1
Menu 7
111