Menu 23 Header Definitions - Emerson Mentor MP Advanced User's Manual

Parameter Keypad and
structure
5.22

Menu 23 Header definitions

Menu 23 contains parameters that define the header parameter for Menu 0.
Menu 0 can be accessed by 2 methods:
1. Pr 11.44 (SE14, 0.35) = 0. Sub block mode.
2. Pr 11.44 (SE14, 0.35) <>0. Linear mode.
Menu 23 Menu 0 Customization
Menu 23 contains the parameters to allow menu 0 to be customized in sub block mode. The first sub block is a user defined area (USEr) which is
configured by the parameters in menu 22. The next 7 sub blocks are pre-defined. Access to the pre-defined blocks is enabled or disabled by Pr 23.03
to Pr 23.09.
Movement between sub blocks is achieved with the left and right keys.
Pr 23.01 contains all the sub block headers.
Table 5-10 and Figure 5-35 show the result of the direction keys when Pr 11.44 (SE14, 0.35) is set to L1 (0). When Pr 11.44 (SE14, 0.35) is not 0 the
left and right keys will allow access to the advance parameter set and menu 0 will become a linear menu.
Table 5-10 Keypad navigation
Starting location
Header
Parameter
When moving between the user block headers the user block header is only displayed if the length of the user block is not zero and there are some
valid parameters in the block. When moving between pre-defined header blocks the pre defined header block is only displayed if the pre defined block
is enabled.
When moving between parameters within a block only valid parameters are displayed.
Figure 5-35 Sub block navigation
Headers
Mentor MP Advanced User Guide
Issue Number: 4
format
Parameter description
Action Finishing location
Right Next header
Left Previous header
Up First parameter in header block
Down Last parameter in header block
Right Next header
Left Previous header
Up Next parameter in header block
Down Previous parameter in header block
SEt UP
SE00
SE13
diAGnoS
di01
di14
triPS
inPut
in01
in10
www.onxcontrol.com
Advanced parameter Serial comms
protocol
descriptions
Performance Menu 23
199