Menu 10: Status And Trips; Drive Ok; Zero Speed; Running At Or Below Min Speed - Emerson Mentor MP Advanced User's Manual

Parameter
Menu 10
structure
5.11

Menu 10: Status and trips

10.01

Drive OK

Bit SP
Coding
1
Update rate Background write
Indicates the drive is not in the trip state. If Pr 10.36 is one and auto-reset is being used, this bit is not cleared until all auto-resets have been
attempted and the next trip occurs. The control board LED reflects the state of this parameter: LED on continuously = 1, LED flashing = 0.
10.02 Drive active
Bit SP
Coding
1
Update rate 4 ms write
Indicates that the armature is active.
10.03

Zero speed

Bit SP
Coding
1
Update rate Background write
Indicates that the absolute value of speed feedback (Pr 3.02 = {di05, 0.40}) is at or below the zero speed threshold defined by Pr 3.05.
10.04

Running at or below min speed

Bit SP
Coding
1
Update rate Background write
In bipolar mode (Pr 1.10 = 1) this parameter is the same as zero speed (Pr 10.03). In unipolar mode this parameter is set if the absolute value of the
speed feedback (Pr 3.02 = {di05, 0.40}) is at or below (minimum speed + 5 rpm). Minimum speed is defined by (Pr 1.07 = {SE01, 0.22}). The
parameter is only set if the drive is running.
10.05 Below set speed
Bit SP
Coding
1
Update rate Background write
10.06 At speed
Bit SP
Coding
1
Update rate Background write
10.07 Above set speed
Bit SP
Coding
1
Update rate Background write
The speed detector in menu 3 sets these flags. (See Pr 3.06, Pr 3.07 and Pr 3.09).
10.08 Load reached
Bit SP
Coding
1
Update rate Background write
Indicates that the absolute value of the active current is greater or equal to the rated motor current as defined in menu 5.
130
Keypad and
FI DE Txt VM DP ND RA NC NV
1
FI DE Txt VM DP ND RA NC NV
1
FI DE Txt VM DP ND RA NC NV
1
FI DE Txt VM DP ND RA NC NV
1
FI DE Txt VM DP ND RA NC NV
1
FI DE Txt VM DP ND RA NC NV
1
FI DE Txt VM DP ND
1
FI DE Txt VM DP ND
1
www.onxcontrol.com
Advanced parameter
format
Parameter description
PT US RW BU
1 1
PT US RW BU
1 1
PT US RW BU
1 1
PT US RW BU
1 1
PT US RW BU
1 1
PT US RW BU
1 1
RA NC NV PT US RW BU
1 1
RA NC NV PT US RW BU
1 1
Serial comms
protocol
descriptions
PS
PS
PS
PS
PS
PS
PS
PS
Mentor MP Advanced User Guide
Performance
Issue Number: 4