Eaton EMR-4000 Installation, Operation And Maintenance Manual page 454

Motor Start Module Counter Values
Value Description
WaitTimeStarts Wait time between starts remained
ColdStartPermit Number of cold starts remaining
StartPerHour StartPerHour
SPH Release In case that the Motor is blocked by a SPH
blocking, this timer needs to be expired before the
blocking is released and the next motor start is
permitted. The next Motor Start will increment the
SPH counter again.
AntiBackSpin Anti-BackspinTimer
IA FLA Measured value: Phase current multiples of FLA
IB FLA Measured value: Phase current multiples of FLA
IC FLA Measured value: Phase current multiples of FLA
I3 PFLA avg Average RMS current of all 3 phases as multiples
of FLA
OCNT Motor Operation count since last reset.
Resettable with "Sys Res Operations Cr" or "All".
EMR-4000
Default
0s
0
0
0min
0s
0FLA
0FLA
0FLA
0FLA
0
www.eaton.com
Size Menu path
0 - 9999999999s [Operation
/Measured Values
/Motor Values]
0 - 9999999999 [Operation
/Measured Values
/Motor Values]
0 - 9999999999 [Operation
/Measured Values
/Motor Values]
0 - [Operation
9999999999min
/Measured Values
/Motor Values]
0 - 9999999999s [Operation
/Measured Values
/Motor Values]
0 - 1000FLA [Operation
/Measured Values
/Current RMS]
0 - 1000FLA [Operation
/Measured Values
/Current RMS]
0 - 1000FLA [Operation
/Measured Values
/Current RMS]
0 - 1000FLA [Operation
/Measured Values
/Current RMS]
0 - 65535 [Operation
/History
/OperationsCr]
IM02602009E
454