Eaton EMR-4000 Installation, Operation And Maintenance Manual page 125

Global Protection Parameters of the Analog Outputs
Parameter Description
Assignment Assignment
Range Adjustable range
Range max Adjustable range maximum.
Range min Adjustable range minimum.
Force Mode For commissioning purposes or for maintanance, Analog
Outputs can be set by force. By means of this function
the normal Analog Outputs can be overwritten (forced).
t-Timeout Force The Analog Output Value will be set by force for the
duration of this time. That means for the duration of this
time the Analog Output does not show the value of the
signals that are assigned on it.
Only available if: Force Mode = Active
EMR-4000
Setting range
1..n,
AnalogOutputList
0...20mA,
4...20mA,
0...10V
-999999.00 -
999999.00°C
-999999.00 -
999999.00°C
Permanent,
Timeout
0.00 - 300.00s
www.eaton.com
IM02602009E
Default Menu path
-.- [Device Para
/Analog Outputs
/AnOut[1]]
0...20mA [Device Para
/Analog Outputs
/AnOut[1]]
1.00°C [Device Para
/Analog Outputs
/AnOut[1]]
0.00°C [Device Para
/Analog Outputs
/AnOut[1]]
Permanent [Service
/Test Mode (Prot
inhibit)
/WARNING! Cont?
/Analog Outputs
/AnOut[1]]
0.03s [Service
/Test Mode (Prot
inhibit)
/WARNING! Cont?
/Analog Outputs
/AnOut[1]]
125