Temperature - GE 469 Instruction Manual

5.3 A2 METERING DATA
PATH: ACTUAL VALUES
n TEMPERATURE
n [ENTER] for more
5
The current level of the 12 RTDs is displayed here. If the RTD is not connected, the value will be "No RTD".
If no RTDs are programmed in
enter this group of messages.
THIS FEATURE NOT
PROGRAMMED
5-10
Courtesy of NationalSwitchgear.com
Õ× Õ×
A2 METERING DATA

TEMPERATURE

ð
HOTTEST STATOR RTD
ENTER
ESCAPE RTD#1: 40°C
RTD #1
ESCAPE
TEMPERATURE: 40°C
MESSAGE
RTD #2
ESCAPE
MESSAGE TEMPERATURE: 40°C
RTD #3
ESCAPE
TEMPERATURE: 40°C
MESSAGE
RTD #4
ESCAPE
TEMPERATURE: 40°C
MESSAGE
RTD #5
ESCAPE
TEMPERATURE: 40°C
MESSAGE
RTD #6
ESCAPE
TEMPERATURE: 40°C
MESSAGE
RTD #7
ESCAPE
TEMPERATURE: 40°C
MESSAGE
RTD #8
ESCAPE
TEMPERATURE: 40°C
MESSAGE
RTD #9
ESCAPE
TEMPERATURE: 40°C
MESSAGE
RTD #10
ESCAPE
TEMPERATURE: 40°C
MESSAGE
RTD #11
ESCAPE
TEMPERATURE: 40°C
MESSAGE
RTD #12
ESCAPE
TEMPERATURE: 40°C
MESSAGE
S8 RTD TEMPERATURE
469 Motor Management Relay
Range: –50 to 250°C, No RTD (open), ---- (shorted).
Only seen if at least 1 RTD is set as Stator
Range: –50 to 250°C, No RTD (open), ---- (shorted).
Not seen if RTD set as None; reflects RTD Name
as programmed
Range: –50 to 250°C, No RTD (open), ---- (shorted).
Not seen if RTD set as None; reflects RTD Name
as programmed
Range: –50 to 250°C, No RTD (open), ---- (shorted)
Not seen if RTD set as None; reflects RTD Name
as programmed
Range: –50 to 250°C, No RTD (open), ---- (shorted).
Not seen if RTD set as None; reflects RTD Name
as programmed
Range: –50 to 250°C, No RTD (open), ---- (shorted).
Not seen if RTD set as None; reflects RTD Name
as programmed
Range: –50 to 250°C, No RTD (open), ---- (shorted)
Not seen if RTD set as None; reflects RTD Name
as programmed
Range: –50 to 250°C, No RTD (open), ---- (shorted).
Not seen if RTD set as None; reflects RTD Name
as programmed
Range: –50 to 250°C, No RTD (open), ---- (shorted).
Not seen if RTD set as None; reflects RTD Name
as programmed
Range: –50 to 250°C, No RTD (open), ---- (shorted)
Not seen if RTD set as None; reflects RTD Name
as programmed
Range: –50 to 250°C, No RTD (open), ---- (shorted).
Not seen if RTD set as None; reflects RTD Name
as programmed
Range: –50 to 250°C, No RTD (open), ---- (shorted).
Not seen if RTD set as None; reflects RTD Name
as programmed
Range: –50 to 250°C, No RTD (open), ---- (shorted).
Not seen if RTD set as None; reflects RTD Name
as programmed
, the following flash message will appear when an attempt is made to
5 ACTUAL VALUES
5.3.2 TEMPERATURE
GE Multilin