GE 469 Instruction Manual page 75

4 SETPOINTS
n) SIMULATE PRE-FAULT
Õ×
PATH: SETPOINTS S3 DIGITAL INPUTS
n ASSIGNABLE INPUT 1
n [ENTER] for more
Setting the
INPUT 1(4) FUNCTION
Õ
469 TESTING SIMULATION MODE
testing. There are no additional Digital Input setpoints associated with this value.
o) SIMULATE FAULT
Õ×
PATH: SETPOINTS S3 DIGITAL INPUTS
n ASSIGNABLE INPUT 1
n [ENTER] for more
Setting the
INPUT 1(4) FUNCTION
Õ
ING SIMULATION MODE
There are no additional Digital Input setpoints associated with this value.
p) SIMULATE PRE-FAULT ... FAULT
Õ×
PATH: SETPOINTS S3 DIGITAL INPUTS
n ASSIGNABLE INPUT 1
n [ENTER] for more
Setting the
INPUT 1(4) FUNCTION
Õ
the
S13 469 TESTING SIMULATION MODE
system testing. There are no additional Digital Input setpoints associated with this value.
GE Multilin
Courtesy of NationalSwitchgear.com
Õ×
ASSIGNABLE INPUT 1(4)
ð
INPUT 1 FUNCTION:
ENTER
ESCAPE Simulate Pre-Fault
to "Simulate Pre-Fault" allows the user to start the Simulate Pre-Fault mode as per the
Õ
SIMULATION MODE
Õ×
ASSIGNABLE INPUT 1(4)
ð
INPUT 1 FUNCTION:
ENTER
ESCAPE Simulate Fault
to "Simulate Fault" allows the user to start the Simulate Fault mode as per the
Õ
setting via a switch input. This is typically used for relay or system testing.
SIMULATION MODE
Õ×
ASSIGNABLE INPUT 1(4)
ð
INPUT 1 FUNCTION:
ENTER
ESCAPE Sim Pre-Fault.Fault
to "Sim Pre-Fault.Fault" allows the user to start the Simulate Pre-Fault to Fault mode as per
Õ
SIMULATION MODE
469 Motor Management Relay
Range: See above.
setting via a switch input. This is typically used for relay or system
Range: See above.
Range: See above.
setting via a switch input. This is typically used for relay or
4.4 S3 DIGITAL INPUTS
S13
S13 469 TEST-
4-25
4