Intermec EasyCoder E4 Installation & Operation Manual page 25

Chapter 4 Programming
Command List, cont'd.
Instruction
FONTSIZE (FS)
FONTSLANT (FL)
FONTS
FORMAT
FORMAT DATE$
FORMAT INPUT
FORMAT TIME$
FORMFEED (FF)
FRE
FUNCTEST$
HEAD
IMAGE LOAD
24
Purpose and Syntax
Sets the size in points of the current single byte character set font.
FONTSIZE|FS <size>
Sets the slant in degrees of the current single byte character set font.
FONTSLANT|FL <slant>
Returns the names of all fonts stored in the printer's memory to the
standard OUT channel.
FONTS
Formats the printer's RAM memory, or formats a SRAM-type memory
card to MS-DOS format.
FORMAT "<device>"[,<no of entries>[.<no of bytes>]]
Specifies the format of the string returned by DATE$("F") and
DATEADD$(...,"F") instructions.
FORMAT DATE$ <string>
Specifies separators for layout variable data entry.
FORMAT INPUT "<start separator>","<end separator>","<field
separator>"
Specifies the format of the string returned by TIME$("F") and
TIMEADD$(...,"F") instructions.
FORMAT TIME$ "<string>"
Activates the paper feed mechanism in order to feed out or pull back a
certain length of the paper web. If the feed length is not specified, the
printer feeds a blank label.
FORMFEED|FF [<feed length in dots>]
Returns the number of free bytes in the RAM memory (1) or the Flash
memory (2).
FRE(<1>|<2>)
Performs various hardware tests on the ROM, RAM, any cards fitted and
on the printhead.
FUNCTEST$("RAM|CARD1|CARD2|HEAD")
Returns the result of a printhead check and sets printhead resistance.
PRINT HEAD(<type of check>)
Receives and stores image files in .PCX format either in the file system
or in volatile memory.
IMAGE LOAD "<imagename>",<filesize>,"<flag>"
Intermec EasyCoder E4 LinerLess – Installation & Operation Ed. 1