Intermec EasyCoder E4 Installation & Operation Manual page 26

Command List, cont'd.
Instruction
IMAGES
INPUT ON
INPUT OFF
INVIMAGE (II)
KILL
LAYOUT END
LAYOUT INPUT
LAYOUT RUN
MAG
MAP
NAME DATE$
NAME WEEKDAY$
NASC
Intermec EasyCoder E4 LinerLess – Installation & Operation Ed. 1
Purpose and Syntax
Returns the names of all images stored in the printer's memory to the
standard OUT channel.
IMAGES
Sets SYSVAR(18) to 0 and enables layouts and use of variable data
fields.
INPUT ON
Restores SYSVAR(18) and disables layouts and use of variable data
fields.
INPUT OFF
Inverts the printing of text and images from "black-on-white" to "white-
on-black.
INVIMAGE|II
Deletes a file from the printer's RAM memory or from a DOS-formatted
memory card. Wildcard support (<"*">).
KILL "[<device>]<filename>"
Stops the recording of a layout description and saves the layout.
LAYOUT END
Starts the recording of a layout description.
LAYOUT INPUT "<layout name>"
Enables a pre-defined layout.
LAYOUT RUN "<layout name>"
Magnifies a font, barfont or image up to four times separately in regard
of height and width.
MAG <height mag>,<width mag>
Changes the ASCII value of a character when received on the standard
IN channel, or optionally on another specified communication channel.
MAP [<device>],<original ASCII value>,<desired ASCII value>
Enters the preferred month name in return strings of DATE$("F") and
DATEADD$(...,"F").
NAME DATE$ <No. of month>,"<name of month>"
Enters the preferred weekday name in return strings of WEEKDAY$.
NAME WEEKDAY$ <No. of weekday>,"<name of weekday>"
Selects a national single byte character set font.
NASC <character set number>|"<filename of character set>"
Chapter 4 Programming
25