Final Reduction Disassembly; Final Reduction Inspection - KYMCO GRAND DINK 125 Service Manual

9
. FINAL REDUCTION

FINAL REDUCTION DISASSEMBLY

Remove the exhaust muffler. ( 2-6)
Remove the rear brake caliper. ( 15-3)
Remove the right rear shock absorber.
( 15-5)
Remove the rear fork. ( 15-4)
Remove the rear wheel. ( 15-4)
Remove the left crankcase cover. ( 8-3)
Remove the clutch/driven pulleys. ( 8 -4)
Drain the transmission gear oil into a clean
container.
Remove the transmission case cover
attaching bolts.
Remove the transmission case cover.
Remove the gasket and dowel pins.
Remove the final gear and countershaft.

FINAL REDUCTION INSPECTION

Inspect the countershaft and gear for wear
or damage.
9-3
GRAND DINK 125/150
Bolts
Final Shaft
Dowel Pin
Final Gear Countershaft
Washers
Countershaft
Drive Shaft
Dowel Pin