Using Hafm From A Remote Location; Remote Workstation Minimum Requirements; Install Hafm Client On A Remote Workstation - HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual

Using HAFM from a Remote Location

Use this section to install the HAFM client on a remote workstation.

Remote Workstation Minimum Requirements

The minimum requirements described in
Requirements" on page 29 must be met to install HAFM on a remote workstation.
Note:
the client machines and the HAFM appliance.

Install HAFM Client on a Remote Workstation

Use these steps to install HAFM on a remote client:
1. Verify that the workstation and the Ethernet LAN segment (with the Edge
2. At the workstation, launch the browser application.
3. At the browser, enter the HAFM appliance IP address.
4. The HAFM splash screen displays with the following options, see
Edge Switch 2/24 Installation Guide
For HAFM to function properly, compatible versions must be installed on both
Switch 2/24 attached) are connected through the Internet.
a. Install HAFM remote client application—Choose this option to install
the application for your workstation platform.
b. Download SNMP MIB files—The Management Information Base
(MIB) files are provided in standard ASN.1 syntax and may be installed
into the MIB database of any SNMPv2-compliant Network Management
Station.
Installing and Configuring the Edge Switch 2/24
"Minimum Remote Workstation
Figure 35.
93