Installing Hafm Client On A Remote Workstation - HP StorageWorks Director 2/140 Installation Manual

Installing HAFM Client on a Remote Workstation

Use these steps to install HAFM on a remote client:
1. Verify the workstation and the Ethernet LAN segment (with the Director
2. At the workstation, launch the browser application.
3. At the browser, enter the HAFM appliance IP address.
4. The HAFM splash screen displays with the following options, see
Figure 43: HAFM remote client install
Director 2/140 Installation Guide
512 MB or greater RAM.
Video card supporting 256 colors at 800 x 600 pixel resolution.
Ethernet network adapter.
Java-enabled Internet browser, such as Microsoft Internet Explorer (Version
4.0 or later) or Netscape Navigator (Version 4.6 or later).
attached) are connected through the Internet.
a. Install HAFM remote client application—Choose this option to install
the application for your workstation platform.
b. Download SNMP MIB files—The Management Information Base (MIB)
files are provided in standard ASN.1 syntax and may be installed into the
MIB database of any SNMPv2 compliant Network Management Station.
Installing and Configuring the Director
Figure 43.
95