Manage Firmware Versions
Modify a Firmware Version Description
Use these steps to modify the description of an Edge Switch firmware version in
the library stored on the HAFM appliance hard drive:
1. At the HAFM appliance, open the HAFM application. The Products View
2. Double-click the icon representing the Edge Switch for which the firmware
3. Choose Maintenance > Firmware Library. The Switch Firmware Library
4. Choose the firmware version to be modified and click Modify. The Modify
Figure 52: Modify Firmware Description dialog box
5. Enter a modified description (up to 24 characters in length) for the firmware
6. The new description for the firmware version displays in the Switch Firmware
7. Click Close.
118
page displays.
version description will be modified. The Hardware View page for the
selected Edge Switch displays.
dialog box displays, as shown in
Firmware Description dialog box displays, as shown in
version and click OK. It is recommended the description include the
installation date and text that uniquely identifies the firmware version.
Library dialog box.
Figure
48.
Edge Switch 2/24 Installation Guide
Figure
52.