Flow Qos Maintenance - Zte ZXR10 5900E Series Configuration Manual

Tip:
The traffic mirroring supports four destination ports at most, and these four destination
ports are shared by the port mirroring.
Configuring Traffic Statistics
To configure traffic statistics, perform the following steps:
Step Command
1
ZXR10(config)#
2
ZXR10(config-pm-qos)#
ipv4-mix| ipv6-access-list| link-acl|ipv6-mix}<
WORD> rule-id < 1-2147483644>pkt-type {
all}|{green}|{red}|{yellow}statistics-type { byte}|{
packet}
Descriptions of the parameters in Step 2:
Parameter
{ipv4-access-list| ipv4-mix|
ipv6-access-list| link-acl|ipv6-mix}<
WORD>
rule-id < 1-2147483644>
pkt-type { all}|{green}|{red}|{yellow}
statistics-type { byte}|{ packet}

2.3 Flow QoS Maintenance

ZXR10 5900E provides the following commands to maintain fLow QoS.
SJ-20150114102049-008|2015-01-15 (R1.0)
pm-qos
traffic-statistics {ipv4-access-list|
Description
The type and name of the bound ACL rule.
The number of the ACL rule where the configuration takes
effect.
The type of statistics packet.
The format of statistics packet.
2-11
Chapter 2 Flow QoS Configuration
Function
Enters pm-qos configuration
mode
Configures the traffic statistics
according to the bytes or the
packet.
Run the no traffic-statistics
{ipv4-access-list|
ipv4-mix| ipv6-access-list|
link-acl|ipv6-mix}< WORD>
rule-id < 1-2147483644>
command to cancel the traffic
statistics configuration.
ZTE Proprietary and Confidential