Direct In Line (Dil) - Panasonic KX-TDA100D Features Manual

1.1.1.2 Direct In Line (DIL)

Description
Provides automatic direction of an incoming trunk call to a preprogrammed destination. Each trunk has a
destination for each time mode (day/lunch/break/night).
[Method Flowchart]
Yes
The call is routed to the
CLI destination.
*: Calling Line Identification (CLI) Distribution:
If the CLI routing is enabled and the caller's identification number is assigned in the Caller ID
Table, the call will not be routed to the DIL destination, but routed to the CLI destination.
[Programming Example of DIL Table]
The table can be programmed for each trunk.
Trunk No.
01 Enable
02 Enable
:
® [450] DIL 1:1 Destination
*1
A trunk call is received.
Does the call have its CLI*
information and is CLI mode enabled
for the trunk and the time mode?
CLI works.
Is the CLI destination
assigned?
No
Is the DIL destination of
the time mode assigned?
Yes
The call is routed to the
DIL destination.
CLI
Day Lunch
Disable
Disable
: :
Yes
The call is routed to the
operator (Intercept Routing
—No Destination).
Destination
... Day
... 101
... 102
: :
1.1.1 Incoming Trunk Call Features
No
No
*1
Lunch ...
100 ...
100 ...
: :
Feature Guide 17