Panasonic KX-TDA100D Features Manual page 15

Method
Direct In Line (DIL)
Direct Inward Dialling (DID)
Multiple Subscriber
Number (MSN) Ringing
Service
3.
Destination Change with the Caller's Identification Number
The Calling Line Identification (CLI) Distribution feature works in conjunction with the DIL/DID/DDI/MSN
features.
Feature
Calling Line Identification
(CLI) Distribution
4.
Available Distribution Feature for Each Optional Trunk Card Type
Trunk Card
Type
LCOT/CLCOT
DID
T1
E1
E & M
BRI
PRI
ü*: Enable (default); ü: Enable
Directs a call to a preprogrammed single destination (e.g., the
operator).
® 1.1.1.2 Direct In Line (DIL)
Directs a call with a DID number from a DID line to a preprogrammed
destination.
DID is also known as Direct Dialling In (DDI).
® 1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
Directs a call with an MSN from an ISDN line to a preprogrammed
destination.
® 1.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
Directs a call to a CLI destination if the caller's identification number
has been assigned in the Caller ID Table.
® 1.1.1.5 Calling Line Identification (CLI) Distribution
Channel Type
—
—
LCOT
GCOT
DID
TIE (E & M)
DR2
E & M-C
E & M-P
—
CO
CO
Description & Reference
Description & Reference
Feature
DIL DID/DDI
ü*
ü ü*
ü*
ü*
ü ü*
ü* ü
ü ü*
ü* ü
ü* ü
ü*
ü ü*
ü ü*
1.1.1 Incoming Trunk Call Features
MSN
ü
Feature Guide 15